BCW 1-BX-5000 5000 Count Storage Box (Full Lid)

  • Package dimensions :11.43 cm L x39.37 cm W x48.26 cm H
  • country of origin :United States
  • package weight :2.0lbs

Related Of BCW 1-BX-5000 5000 Count Storage Box (Full Lid)

No. 1

SmartSign "Notice - Watch Your Step" Label | 7" x 10" Laminated Vinyl

  • DURABLE VINYL. Made of 4 mil thick, conformable vinyl and has an aggressive adhesive backing.
  • LAMINATED. UV-resistant, weatherproof overlaminate protects the label from moisture, solvents, chemicals, abrasion and fading.
  • EASY TO CLEAN. Laminated vinyl labels can be easily wiped off to remove dirt, dust, or grease.
  • INSTALLATION. Labels stick to flat or curved surfaces and can be used indoors or outdoors.
No. 2

ISPINNER 170pcs Rubber End Caps Assortment Kit, Flexible Bolt Screw Thread Protector Safety Cover in 10 Sizes from 2/25" to 4/5", Black and Red

  • 【HIGH QUALITY】The flexible end caps are made of rubber material, soft, flexible and insulated, which can cover any scratches or burrs that may occur during the cutting process, provide protection against injury by pointed rod and tubing edges.
  • 【VARIOUS SIZE】This black and red end cap assortment kit have 10 different sizes 2 colors for you to choose, including 20pcs 2/25", 20pcs 3/25", 20pcs 5/32", 20pcs 1/5", 20pcs 1/4", 20pcs 7/25", 20pcs 5/16", 12pcs 3/8", 10pcs 1/2", 8pcs 4/5". Organized in a divided plastic case for you to quickly and easily find the size you need.
  • 【GOOD PROTECTION】These Rubber End Caps are not only wear-resistant and corrosion-resistant, but as a protective cover, they can wrap the screws intact, protect against dust and rust, and extend the life of the screws.
  • 【EASY TO USE】Choose the right size first. We recommend choosing one that is slightly smaller than the outer diameter of the product to be protected, because rubber material is soft and flexible. Then cut it into the proper length according to your own need, adjust the protective cover to the appropriate position.
  • 【WIDE APPLICATION】Perfect for covering screws or other threaded parts, round tubing. Suitable for all kinds of furniture feet, pipes, hooks, iron rods, cables, cylinders, etc.
No. 3

meite SC760 16 Gauge 1/2-Inch C Ring Staples in 304 Stainless Steel for SC760B C Ring Gun Tools Inside Diameter of 3.2-4.8mm (1 Small Pack (4500 PCS))

  • Crown Width 16 Gauge in 304 stainless steel
  • Similar to C17/ SC-660/ SC-760/ 16G 100P
  • 4500 PCS/ Small Pack; 18000 PCS/ BOX
  • Staples Compatible With meite SC760B C-RING Stapler
  • Use For Mattress, Car Seat . Sofa. Fencing. Pet Cage in Saltwater.
No. 4

FYY Car Trash Can with Lid, Collapsible Pop Up Car Trash Bin, Leak-Proof Waterproof Portable Garbage Storage Bag Multifunctional Organizer Trash Can Bin with Hanging Hook Black

  • [Keep Your Car Clean and Tidy] This car trash can made of polyester fabric and polypropylene. Can be able to be placed anywhere, suitable for all kinds of vehicles. Keep your car clean, organized and free of trash. With lid design can keep air fresh in your car
  • [Leak-Proof & Waterproof] This garbage can is made of premium polyester material that is leak-proof and waterproof, and it is easy to clean and wash. No more worry about liquid spills when you are in the car
  • [Placements] Built with adjustable hook and look, allow you to adjust the length and match the hanging place like headrest pole and air conditioner vent. Adhesive tape at the bottom of the trash bin allow you to put it on the floor and keep firmly
  • [Multifunctional] This trash can not only be used to hold and toss wrappers, rubbishes, wastes or garbage on a trip, also used as a handy storage organizer to hold small items and sundries to keep you car, home and office clean, tidy and organized
  • [Collapsible Design] Size:6.3 x 6.3 x 8.1 inch (unfolded) 6.3 x 6.3 x1.6 inch (folded). This car trash bin can be folded when not in use for better storage such as the side of the car door or car boot. If you have any quality issue with our products, please feel free to contact our customer service
No. 5

Gates TCKWP277A Engine Timing Belt Kit with Water Pump

  • Country of Origin : United States
  • The Package Height of the Product is 3.75 inches
  • The Package Length of the Product is 12.36 inches
  • The Package Width of the Product is 7.78 inches
No. 6

Honeywell HONVNS1-2X Servus by NEOS Voyager 2X 11'' H Black 2.5 mm Polyurethane/500 Denier Nylon Overshoes With Plain Toe And STABILicers Outsole, English, 15.34 fl. oz., Plastic, 1" x 1" x 1"

  • STABILicers outsoles with 32 replaceable cleats per pair embedded in the sole to help maintain traction in the worst winter conditions
  • 2.5 mm polyurethane internal bootie Cleat wrench included with each pair
  • Rugged 500 denier nylon upper with waterproof membrane
  • Adjustable velcro cuff provides a snug fit
No. 7

BUD Industries CU-3286 Plastic Style A Utility Box, 10-9/64" Length x 6-9/64" Width x 3-1/8" Height, Black Texture Finish

  • ABS plastic with UL 94V-O flammability rating suggested service temperature of -20 to 70 degrees C
  • Comes with close fitting interlocking lid and assembly hardware
  • Made of ABS plastic
  • Black textured finish
  • External measures 10-9/64" length by 6-9/64" width by 3-1/8" height; internal measures 7-15/16" length by 5-3/4" width by 2-57/64" height
No. 8

Suw Hard Travel Case for EG Air Quality Monitor Formaldehyde Detector Pollution Meter Sensor Tester Detect Test Indoor Pollution TVOC Volatile Organic Compound Gas (only case)

  • Suw Hard Travel Storage Carrying Case
  • Protect your favorite device from bumps dents and scratches
  • Made to fit EG EGVOC-100 Air Quality Monitor
  • Material:EVA ; Color: Black; Inner size:6.37*3.1*1.8(L*H*W) inchs
  • For sale is case only (device and accessories are sold separately)
No. 9


  • Ideal for Spills garage cleaning and industrial cleaning purposes
No. 10

PULSAFEEDER LB03SA-KTCJ-XXX PULSAtron Series A Plus Metering Pump with Dual Manual Control, Blue/Black

  • Manual Control by on-line adjustable stroke rate and stroke length
  • Highly Reliable timing circuit
  • Circuit Protection against voltage and current upsets
  • Solenoid Protection by thermal overload with auto-reset
  • Water Resistant for outdoor and indoor applications
No. 11

SMLTH Quality Leverless Mount Demount Head Auto 34 28 TCX Tongue RP6-710014120 Compatible w/Нuntеr TCA34

    No. 12

    Medline Remedy Skin Repair Cream, 4 oz Tubes (3 Pack)

    • Remedy Olivine Skin Repair Cream helps protect and relieve damage related to frequent hand washing such as dryness, cracked, inflamed, reddened and itchy skin
    • Blend of nutrients targeted for skin cells, as well as dimethazone to help prevent e-TEWL
    • Tested to be non sensitizing, non allergenic
    • Does not interfere with CHG' does not interfere with or degrade latex
    • Medline's Skin Repair Cream has a fresh orange vanilla scent
    • Effective as a daily moisturizing body lotion for the hands and body
    • Can also be used to help prevent skin breakdown
    No. 13

    SeeedStudio - Grove - I2C Hub Extension Grove Module For Base Shield - DIY Maker Open Source BOOOLE

    • 1) BOOOLE INC. researches and develops electronic products and open source hardware with the aim of promoting MAKER SPACE and DIY practice. It makes you believe innovation and invention are no more exclusive to scientific research institutes.
    • 2) We are newcomer on Amazon,but we are seasoned on Open Source Hardware.
    • 3) Please kindly give us a chance,you are ensured the best experience of buying from us.
    No. 14

    QLOUNI 4PCS Creality Aluminum Hand Twist Leveling Nut with 4PCS Hot Bed Die Springs for Ender 3/3 Pro, Ender 5/5 Plus/Pro, CR-10, CR10S/10S Pro, CR 20 3D Printer

    • ❂[Package Include] Package come with 4 pieces aluminum hand twist level nuts and 4 pieces yellow die spring, bright colors make you work happily.
    • ❂[High Quality Material] Made by high quality aluminum, last much longer your stock plastic nuts.Metal nut is more powerful and will twist more tightly than plastic nuts with non-slip texture.
    • ❂[Upgraded Design] The twist level nut is approx. 2.36 inch/ 60 mm in diameter and 0.35 inch/ 9 mm in thickness, the torque of these nuts is large, making it easier to fine tune the hot bed.
    • ❂[Let 3D Printer More Stable] Used for 3D Printer Upgraded Hand Twist Leveling Nut For Hot bed and Make the Hot Bed Become more stable, It will be more easier to level for print platform.
    • ❂[Widely Compatibility] Apply for 3D printer hot platform, the red nuts are original upgraded replacement part for Ender 3/3 Pro, Ender 5/5 plus/ 5 pro, CR-10, CR-10 V2, CR-10 max, CR 10, CR-10 mini, CR-10S, CR 10S Pro, CR-10 plus, CR-X, CR 20.
    No. 15

    Eiko #49665 Q20MR11/DC/FL/12V/FR/GBF 20 watt MR11 Halogen Reflector Lamp, Double Contact Bayonet (BA15d) Base, 32° Beam Angle, 2,000hr Life, 12 Volt

      No. 16

      MelaPower® 6x Detergent-96-load, Fresh Scent

      • HE formula for front-loading high-efficiency washers
      • Just ½ fl. oz. cleans a whole load of laundry
      • Rinse Guard keeps dirt from redepositing on clothes
      • No caustic chemicals or unnecessary fillers
      • Drain-Back Cap Included
      No. 17

      Solenoid Starter Relay Replacement for GY6 50cc 125cc 150cc Chinese ATV Dirt Bike Scooter

      • 180 days warranty and 100% money back guarantee if not satisfied.
      • Fits for Chinese Made GY6 50cc 125cc 150cc ATV scooter
      • Our Solenoid Starter Relay use pure copper core wire for heavy current. Cheap garbage relay offen use aluminium enamelled wire which is easily to generate heat.
      • The relay comes with soft rubber dust cap, never use hard rubber material.
      No. 18

      WeldingStop PT-80 IPT-80 PTM-80 Plasma Electrode 52558 Tip 1.0mm Nozzle 0.039 Inch Swirl Ring Torch Consumables Kit Pack-45

      • These plasma cutting torch consumables can use on IPT-80, IPTM-80, PT-80, PTM-80 Series plasma cutting torch
      • Package including 20pcs Electrodes + Tips and 2pcs Swirl Ring + Standoff Guide and 1pc Retaining Cup
      • There are 45pcs plasma cutter consumables in every package
      • The diameter of tips are 1.0mm or 0.039 inches, plasma cutting current is about 40-50A
      • They are WS replacement parts, NOT Original plasma consumables kits
      No. 19

      270pcs 3:1 Dual Wall Adhesive Heat Shrink Tubing Kit, 5 Sizes (Diameter): 3/8, 1/4, 3/16, 1/8, 3/32 inch, Marine Wire Cable Sleeve Tube Assortment with Storage Case for DIY by MILAPEAK (Black & Red)

      • ★【Versatile & DIY Helper】- Multiple sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection.
      • ★【Safe & ECO-Friendly】- Our heat shrink tubes are both UL & CSA certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, Formaldehyde (HCHO) Free, protect you and your famaily.
      • ★【Customized Protector】- Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you and your kids DIY.
      • ★【Fast & Easy Use】- Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection. It is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a lighter heating if the tube is small or hair dryer heating for large one. Also Includes handy plastic container for easy organization and storage.
      • ★【What You Get】- Total 270pcs heat shrink tubes, 5 Sizes, DIA: 3/8"(8pcs), 1/4"(12pcs), 3/16"(20pcs), 1/8"(80pcs), 3/32"(150pcs), Comes with storage box, our worry-free 12-month and friendly customer service.
      No. 20

      0.07inch MK8 0.02inch Nozzle Extruder Steel Heater Block Assembly Hot End Assembled Compatible with Prusa i3 3D Printer

      • Tip of the nozzle, aluminum heating block, Throat pipe.
      • MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V40W.
      • Stainless PTFE lined barrel for trouble free, low friction print.
      • Pre-wired NTC 3950 themistor.
      • Clamping screw and washer is easy for mounting thermistor.